心動Heartbeat

商品貨號:489

500

  • N
  • 商品描述
  • 常見問題

489_心動Heartbeat

裝飾膠帶 Colored Masking Tape With Designs 木田森果 wood3f

◆ W489-BJZ (Weight:130 grams) ∣規格∣一卷,寬6cm*長10m(90cm循環圖) ∣Size∣One Roll,6cm*10m (90cm Loop) ∣材質∣帶離型紙的亮面PET,可重覆黏貼 ∣Material∣Satin-finish PET Tape With Release Paper, Re-stickable ∣印刷∣局部白墨重油工藝(無透光效果) ∣Printing∣Spot Varnish (No Light Transmission Effect)

◎ 購買須知 ◎ ◎ Purchase notice ◎

圖片會因拍攝時的光源、色溫或螢幕設定不同而產生色差,實際顏色以實品為準,無法接受者,請勿訂購。 The picture will be different depending on the light source, color temperature or screen setting. The actual color is subject to the actual product. If it is unacceptable, please do not order.

由於印刷PET材質為滑面材質 表面因無毛細孔 油墨皆有 脫離的機率 如微脫落皆屬正常現象 再請大家見諒 Due to PET masking tapes are print on smooth surface , it is common that the ink peel off a little bit from the masking tape. We are sorry for any inconvenience this may caused you.

重油工藝有不可逆的免物理變化會產生(位移、擴張、溢出、內縮)皆為正常現象,5mm以內的位移都是屬於正常可容範圍內。 Spot Varnish will produce irreversible physical changes (displacement, expansion, spillage, shrinkage) are normal phenomena. Displacement within 5mm are within the normal capacity range.

重油工藝對於環境氣溫及濕度要求較高,在特定的指數到達時皆有重油工藝剝落的風險,保存時間也不能過長會產生有硬化使油墨剝離及氧化後產生白霧化的狀況發生。 Spot Varnish for the ambient temperature and humidity requirements are high, in reaching a specific index there will be the risk of Spot Varnish peeling. The storage time can not be too long, or it will produce hardening ink peeling, and oxidation after the white atomization.

由於重油工藝是印在PET光滑表面及印刷油墨上面,請盡量便免重覆黏貼及用刮板輔助刮出空氣,否則會產生不可逆的免物理現象造成油墨剝離。 As the Spot Varnish is printed on the smooth surface of PET and printing ink on top, please try to avoid repeated sticking and use scraper to assist in scraping out the air, otherwise there will be irreversible physical phenomenon causing ink peeling.

◎ 購買須知 ◎ ◎ Purchase notice ◎

圖片會因拍攝時的光源、色溫或螢幕設定不同而產生色差,實際顏色以實品為準,無法接受者,請勿訂購。 The picture will be different depending on the light source, color temperature or screen setting. The actual color is subject to the actual product. If it is unacceptable, please do not order.

由於印刷PET材質為滑面材質 表面因無毛細孔 油墨皆有 脫離的機率 如微脫落皆屬正常現象 再請大家見諒 Due to PET masking tapes are print on smooth surface , it is common that the ink peel off a little bit from the masking tape. We are sorry for any inconvenience this may caused you.

重油工藝有不可逆的免物理變化會產生(位移、擴張、溢出、內縮)皆為正常現象,5mm以內的位移都是屬於正常可容範圍內。 Spot Varnish will produce irreversible physical changes (displacement, expansion, spillage, shrinkage) are normal phenomena. Displacement within 5mm are within the normal capacity range.

重油工藝對於環境氣溫及濕度要求較高,在特定的指數到達時皆有重油工藝剝落的風險,保存時間也不能過長會產生有硬化使油墨剝離及氧化後產生白霧化的狀況發生。 Spot Varnish for the ambient temperature and humidity requirements are high, in reaching a specific index there will be the risk of Spot Varnish peeling. The storage time can not be too long, or it will produce hardening ink peeling, and oxidation after the white atomization.

由於重油工藝是印在PET光滑表面及印刷油墨上面,請盡量便免重覆黏貼及用刮板輔助刮出空氣,否則會產生不可逆的免物理現象造成油墨剝離。 As the Spot Varnish is printed on the smooth surface of PET and printing ink on top, please try to avoid repeated sticking and use scraper to assist in scraping out the air, otherwise there will be irreversible physical phenomenon causing ink peeling.

聯絡我們
  • -
  • ※ 當此商品補貨時會自動通知您
購物車
您的購物車是空的
  • {{ item.name }}
    {{ item.option_sort }}
    {{ item.quantity }}
    {{ item.price }}
    已下架